Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Park Slope, NY
We provide independent Lennox air duct cleaning and service across Park Slope, and the thing that makes our work here different is this: Lennox’s communicating air handlers and variable-speed blowers respond to duct restrictions in ways that other brands don’t, so the duct system has to be judged against the equipment’s own airflow spec, not just cleaned and forgotten. That single distinction matters more in Park Slope than almost anywhere, because the brownstones here were never designed for modern forced air. If your Lennox system is cycling, running long, or pushing dust through the registers, call (844) 351-1795. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Why Park Slope Residents Choose Us for Lennox Service
Lennox equipment has its own logic. The control boards report their own fault codes. The communicating thermostats talk to the air handler in a language that isn’t Trane’s or Carrier’s. Our technicians have up to 9 years of experience, and they read the Lennox fault codes and the equipment literature instead of guessing at what the system is telling them.
Park Slope homeowners notice dust settling on the same shelf every week, allergy symptoms that spike indoors, or a furnace that short-cycles its way through the heating season. Those are usually signs the duct system is fighting the equipment, not signs the equipment is failing. We clean, seal, and repair ducts on Lennox systems with parts chosen for fit: OEM components for communicating controls, boards, and cased-coil parts where correct fit and warranty continuity matter, and quality aftermarket materials for flex duct, mastic, and registers.
One flat price per system is agreed before work starts. You get before-and-after photos of your own ducts. And every local pro we connect you with is licensed and insured as the state requires. Scheduling is straightforward: call, describe what the system is doing, and we book a visit.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Park Slope
The failure modes we see on Lennox systems in Park Slope are specific, and so are the causes:
- Healthy Climate and PureAir cabinet leaks. Media filter cabinets added onto old brownstone chases leak at the transition collars when the seams aren’t sealed to the existing return. Plaster dust and basement air get pulled straight into the return and spread through the house.
- Starved returns on communicating systems. SLP98V furnaces paired with XC25 variable-capacity units push against returns in brownstone chases that were never sized for modern airflow. The blower runs long and loud, and high-limit faults begin. The fix is usually right-sizing the return, not replacing the equipment.
- Oversized static pressure on original duct runs. Original galvanized runs feeding Lennox furnaces in 11215 and 11217 rowhouses were sized for gravity heat. Flex-duct transitions collapse, static pressure climbs, and Lennox cased evaporator coils foul faster.
- Disturbed asbestos tape at the plenum. Older duct joints near the Lennox plenum connection can carry asbestos-containing tape or insulation. Certified handling comes before any sealing or coil cleaning, not after.
- Condensation and dust in poorly sealed ducts. New York City’s humid summers and cold winters drive condensation inside unsealed ducts, and the dense urban environment traps pollen and street dust. Heating season runs October through April, so fall cleaning catches the system before constant use.
Lennox Service in Park Slope: What Local Conditions Mean for Your Equipment
Park Slope’s 1880s – 1910s brownstones frequently hide original stamped-tin and galvanized ducts above stamped-tin ceilings and behind plaster cornices. That changes how a Lennox retrofit job runs in 11215 and 11217. Remote-camera inspection comes first, because nobody should cut an access hole through a landmarked interior to find out what’s behind the plaster. A video inspection through existing openings shows whether the old runs are sound, whether asbestos tape sits at the plenum, and whether the chase can carry the airflow a modern Lennox air handler needs. In a typical Park Slope brownstone, a Lennox furnace or air handler serving a converted multi-unit layout sits on a return chase that was never sized for modern forced air. The system runs hot, cycles on limit, and pushes dust through leaky plenum seams. A qualified independent pro runs that video inspection first, then cleans the supply and return sides, seals the plenum and chase joints with mastic, and confirms airflow against the Lennox air handler’s spec. Most of the time the answer is duct sealing and a right-sized return, not new equipment.
Lennox Models & Products We Service in Park Slope
We service the full range of Lennox residential equipment found in Park Slope homes. That covers Merit Series furnaces and air conditioners, Elite Series furnaces and condensers, and Dave Lennox Signature Collection equipment, including variable-speed furnaces and variable-capacity air conditioners. We also work on Healthy Climate and PureAir media cabinets and air cleaners, which show up often on retrofits into older brownstone duct systems.
Parts selection follows the job. Communicating controls, boards, and cased-coil components call for Lennox OEM parts, because fit and warranty continuity matter there. Generic flex duct, mastic, and registers don’t need that, so we use quality aftermarket materials and put the money where it changes the outcome. If you’re deciding between repair and replacement on aging Merit equipment, heat exchanger condition and whether the duct system can meet the air handler’s airflow spec usually drive the answer.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Park Slope
Duct cleaning on a Lennox system in Park Slope is priced per job, with a written estimate that sets the final number before work starts. It’s not priced per vent, and there’s no teaser figure that grows once someone’s in your basement.
- Air duct cleaning for a single-unit brownstone floor: typically $450 to $900
- Return duct cleaning added to a Lennox system in a converted multi-unit layout: typically $150 to $400
- Duct sealing and plenum joint work: typically $400 to $1,200, depending on access
- Video inspection: typically $150 to $350
- Dryer vent cleaning: typically $120 to $250
- Air quality and sanitizing with negative-air containment: typically $300 to $800
The free estimate covers a look at the Lennox equipment, the duct layout, and the access points, so the number reflects your building rather than a phone quote. Call (844) 351-1795 for an exact quote. Estimates are free.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Park Slope
It’s usually a duct problem showing up as a furnace fault. A high-limit trip means the system is overheating because it can’t move enough air, and undersized returns in brownstone chases are a common cause on communicating Lennox air handlers. The right first step is a static pressure check and a video inspection, not a parts swap. Call (844) 351-1795 for an exact quote. Estimates are free.
Musty summer smells usually come from condensation sitting in unsealed duct runs and a cased coil that has collected debris. New York City’s humid summers make that worse, and a fouled Lennox cased coil holds moisture between cooling cycles. Cleaning the coil and sealing the duct joints removes the source. Call (844) 351-1795 to book an inspection.
Yes, and that’s exactly what the remote camera is for. We inspect through existing openings first, then plan access around plaster cornices and stamped-tin ceilings instead of through them. Landmark-district constraints get treated as part of the job. Call (844) 351-1795 and we’ll walk through what your building allows.
The cabinet is usually leaking at the transition collar where it meets an old chase. When the seams aren’t sealed, the return pulls plaster dust and basement air in past the filter instead of through it. Sealing those joints is a same-visit fix with our duct repair and sealing service. Call (844) 351-1795 for an estimate.
Fall is the practical window. Heating season here runs October through April, so cleaning and sealing before the system switches to constant use means the first cold stretch runs on clean ducts with sealed plenums. Spring works too if you missed it. Call (844) 351-1795 to get on the schedule.
Service Areas Near Park Slope
We serve Lennox owners throughout Park Slope and the surrounding neighborhoods, including Sunset Park, Borough Park, Kensington, Bay Ridge, and Dyker Heights. We also cover nearby Prospect Heights and Carroll Gardens, where the housing stock raises many of the same duct and airflow questions.
Book Your Lennox Service in Park Slope Today
If your Lennox system is running hot, cycling on limit, or leaving dust where it shouldn’t be, the duct system is the place to start. We’re an independent Lennox service provider working across Park Slope, and our Lennox expertise means the equipment gets read correctly. Call (844) 351-1795 for a free estimate. One flat price per system, agreed before work starts.
Written by the team at Air Duct Cleaning Sunset Park.