Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable HVAC Cleaning Across Park Slope
HVAC cleaning in Park Slope is different from cleaning a newer building. The houses here are 1880s – 1910s brownstones and limestone rowhouses, many with ducts that were retrofitted decades after the walls went up. We work with homeowners on blocks across Park Slope to find what’s actually in those runs before anyone touches a brush. Our technicians have up to 9 years of experience, and they know that a system in a Fourth Avenue brownstone rarely looks like one off Seventh Avenue. Call (844) 351-1795 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Park Slope Homeowners Call Air Duct Cleaning Sunset Park for HVAC Cleaning
Park Slope homeowners tend to be careful about their houses, and that matches how we work. We come in with Rotobrush and Nikro systems built for duct cleaning, not a shop vac and a promise, and we check what’s inside the system before we recommend anything. On blocks of landmarked brownstones, that means a camera inspection instead of cutting into a plaster cornice to see what’s behind it. It’s slower for us and better for your walls.
Homeowners across Park Slope reach out because dust keeps landing on the registers, the upstairs rooms run weak, or a musty smell shows up when the heat kicks on. We can work with your insurer, we agree one flat price per system before work starts, and we take before-and-after photos of your own ducts so you can see what changed. The local pro handling the job is licensed and insured as New York requires. We keep the same straightforward approach to every Park Slope job, whether it’s a single-family brownstone on a side street or a multi-unit rowhouse near Fifth Avenue.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our HVAC Cleaning Services in Park Slope
Not every Park Slope job needs the same work. Below are the components we handle most often in older homes here, plus the treatment that keeps a clean coil clean.
Evaporator Coil Cleaning
The evaporator coil sits inside the air handler and takes in every bit of dust and pollen your return ducts carry to it. In a Park Slope brownstone with an unsealed original return, that coil collects a thin mat of debris that quietly cuts cooling capacity through the humid New York summer. We clean it, then treat the coil to slow the buildup from coming back.

Blower Cleaning
The blower wheel is the part that actually moves air through your Park Slope home, and its fins cup dust the same way a fan blade does. Caked fins throw the wheel off balance and reduce the volume of air reaching the far rooms of a 3 – 4 story rowhouse. Cleaning the wheel restores that air and takes strain off the motor.

Condenser Cleaning
Outdoor condensers in Park Slope sit close to street level, where the dense urban environment traps pollen and street dust in the coil fins. A fouled condenser makes the whole system work harder in July and August. We clean the fins without bending them, so the unit can shed heat the way it was designed to.

Air Handler Cleaning
The air handler is the box that ties everything together, and in converted Park Slope brownstones it’s often tucked into a closet, a chase, or a soffit that leaves little room to work. We clean the interior, the cabinet surfaces, and the drain area so the unit isn’t recirculating its own dust. If we spot a crushed or disconnected run feeding it, that’s the sort of thing our HVAC Cleaning visit is built to catch and fix on the same trip.
Trusted Brands We Service in Park Slope
We work on systems built around Honeywell and Aprilaire air quality products, and we carry and service both, which keeps the relationship going past a single visit. For cleaning and containment we use Rotobrush and Nikro systems and Abatement Technologies negative-air equipment, and we apply Guardsman-grade cleaning protection as part of the sanitizing step. We don’t stock parts in a Park Slope warehouse, so when a component needs replacing we order the right one rather than forcing a fit. The upside for you is a straight answer about what your system needs and a fast turnaround on the work itself.
Common HVAC Cleaning Problems We See in Park Slope Homes
These are the patterns that show up again and again in buildings of this age and type.
- Undersized original galvanized runs. Many Park Slope rowhouses never had modern forced-air ductwork at all, and the runs that exist were squeezed into spaces not meant for them. A cleaner who assumes modern flex duct throughout will misdiagnose half the system.
- Disconnected runs hidden in chases and soffits. A run can come loose behind a plaster wall and blow conditioned air into a cavity for years. You feel it as a weak room and a higher bill, and a camera finds it.
- Condensation at unsealed joints. New York’s humid summers meet cold duct surfaces and the joints sweat. Unsealed gaps become a place for dust to clump and stay damp.
- Decades of accumulation on coils and blowers. Surface cleaning leaves the deep layer in the joints and on the fin pack. Source removal with negative pressure and agitation is what actually clears it, and in these homes that matters more than a quick pass.
See the difference
Before
After
Before
After
Before
AfterWhy Park Slope’s Original Tin Ducts and Landmark Constraints Change the Job
Here’s the part a generic duct page misses. Park Slope’s 1880s – 1910s brownstones often still have original galvanized-steel ducts tucked behind plaster cornices and above stamped-tin ceilings. Those ducts are part of the building, and many sit inside a landmarked interior where cutting an access hole isn’t an option. So instead of opening a cornice to see what’s inside, a technician runs a remote camera through the existing runs. That single decision, camera instead of knife, is what protects the interior details that make these houses worth owning. It also happens to be the only reliable way to map a system that was stitched together over decades. Our technicians have up to 9 years of experience reading exactly this kind of layout.
In a typical Park Slope brownstone, a homeowner notices weak airflow or dusty registers after years of use, and a camera inspection reveals crushed flex duct or disconnected runs hidden behind plaster walls, sometimes wrapped in aging asbestos tape. A qualified local pro uses negative pressure and HEPA filtration to contain debris, then employs agitation tools to pull accumulated dust from the supply and return ducts before sealing the gaps and reconnecting the runs. Often the sealing work proves more critical than the cleaning itself. If a technician cuts into a plaster cornice or a stamped-tin ceiling to reach a duct, they can damage a landmarked detail that should have been navigated with a camera. Assuming modern flex duct throughout is the other common mistake; many of these homes still have undersized original galvanized runs or disconnected sections hidden in chases and soffits. And skipping source removal leaves decades of accumulation in unsealed joints, right where humid summer air causes condensation and regrowth. When the run feeds a coil or blower, the buildup lands there too, which is why coil and blower cleaning so often come up together with duct sealing in these houses.
Pricing for HVAC Cleaning in Park Slope, NY
Pricing is set per job from a written estimate, and the estimate is free. What you’ll see in Park Slope runs higher than in newer-build neighborhoods nearby, because camera inspection, sealing, and access work take longer in a brownstone than a straight vacuum of clean flex duct. These are typical ranges for this market:
- Evaporator coil cleaning: $220 – $420, depending on coil location and access.
- Blower wheel cleaning: $180 – $350, more if the air handler is boxed into a chase.
- Condenser cleaning: $150 – $300.
- Air handler cleaning: $250 – $500, higher where access panels have to be worked around.
- Coil treatment after cleaning: $90 – $180.
- Combined air handler, coil, and blower cleaning: $450 – $800.
Those figures move with how many systems a multi-unit Park Slope building has, whether a crushed run needs reconnecting, and how hard the ducts are to reach. The written estimate sets the final price, one flat price per system, and we take before-and-after photos so you can see what the work covered.
We Also Serve Cities Near Park Slope
We serve Park Slope and the neighborhoods around it. If you’re nearby in Prospect Heights, Carroll Gardens, Red Hook, or Clinton Hill, the same full-scope service applies. Call (844) 351-1795 for a free estimate and we’ll set up a time that works for your building.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HVAC Cleaning in Park Slope
They use a remote camera run through the existing duct openings instead of cutting new access holes in plaster or tin. That keeps landmarked interior details intact while still letting us map the runs, spot crushed sections, and plan the cleaning. If you have original tin work you’re worried about, say so when you call, and we’ll note it before anyone arrives. Call (844) 351-1795 for an exact quote, estimates are free.
It means part of your system is leaking conditioned air into a wall cavity instead of delivering it to a room. That’s usually why one room feels weak or a bill creeps up. The fix is reconnecting the run and sealing the joint, work we handle on the same visit rather than handing you off to a second contractor. Call (844) 351-1795 for an exact quote, estimates are free.
Because unsealed joints let the dust right back in. Cleaning removes decades of accumulation, but if the gaps stay open, humid summer air keeps condensing there and the debris returns. Sealing closes the source, which is the difference between a clean system and one that stays clean. Call (844) 351-1795 for an exact quote, estimates are free.
It changes how we work around those sections, not whether the job can be done. Aging tape or insulation on older ductwork is common in these buildings, and we contain the area with negative-air equipment and HEPA filtration so debris doesn’t spread through the house. We don’t remove asbestos; if a section needs abatement, that’s a licensed specialist’s job and we’ll tell you so. Call (844) 351-1795 for an exact quote, estimates are free.
Weak airflow that cleaning the ducts alone doesn’t fix, a musty smell when the system starts, or dust settling right after a cleaning all point to the air handler or blower. So does a fine mat of debris on the coil. In a brownstone these components are often boxed into a closet or chase, so the buildup goes unnoticed for years. Call (844) 351-1795 for an exact quote, estimates are free.
Written by the team at Air Duct Cleaning Sunset Park.